Aquascan Aquapulse AQ1B Control Unit Only, with Belt & Instructions, No Coil
The AQUAPULSE 1B underwater metal detector from Aquascan is a wonderful underwater scuba detector whether you are dragging the bottom of a lake or searching saltwater beaches. This control unit can be submersed up to 100m. A coil will need to be purchased separately.
The AQUAPULSE 1B (38cm) is an underwater metal detector employing a large diameter search head mounted on the end of a telescopic arm. The 1B can detect objects up to a range of 3m (10ft). This makes it the most powerful unit on the market. Apart from the sensitivity threshold control, the 1B underwater metal detector has an additional control to enable the whole range of AQUAPULSE coils and accessories to be used with it. The same control can be used to reject surface clutter such as ring pulls, cigarette foil etc., often found buried in the sand or mud. The internal NiMH battery pack allows in the order of 10 hours operation.
- Manufacturer Aquascan
-
Manuals
- Quick Look Control unit for the AQ1B Aquascan underwater detector. A FREE belt and detailed instructional manual are included.
- SKU 1323-AQ2010
- Manufacturer SKU AQ.2.010
- Product Type Metal Detectors
- Warranty Yes
- Detector Type Professional
- Interchangeable Search Coil Yes
- Technology Pulse
- Arm Rest None
- Arm Rest Strap No
- Adjustable Shaft No
- Apps None
- GPS No
- Audio Tones Yes
- Depth Indication No
- Programmable Target Id No
- Target Id No
- Threshold Adjustable
- Pinpoint Mode Yes
- Vibration Mode No
- Search Flashlight No
- Display Type N/A
- Backlit Display No
- Volume Control No
- Bluetooth Compatible No
- Interchangeable Headphones No
- Battery Type Rechargeable
- Battery Life (hr) 8-10 Hours
- Waterproof Waterproof
- Rechargeable System Yes
Instruction manuals
Average Experience Rating
Any experience to share?
Your opinion is important to us. Please share your review with our community.
Write a reviewThere are no entries.
-
Aquascan 12" Diver Short Handle (AQ1B)
$92.00Where compactness matters, you can trust this Aquascan 12" handle to exceed expectations. Its for 8" AQ3001; 10" AQ3002; and 15" AQ3003 coils.SKU: AQ.4.003 -
Aquascan Headphone Adapter (AQ1B / DX300)
$89.00Enables you to connect headphones to the Aquascan Aquapulse AQ1B Standard and Aquascan DX-300 Magnetometer.
-
Aquascan Miniature Palm Coil (AQ1B)
$199.00This palm-held miniature sensor - compatible with AQ1B detectors - helps you to quickly scan small places/items. Works underwater too.SKU: AQ.3.045 -
Aquascan 15" Search Coil (AQ1B)
$279.0015", fully waterproof & submersible, you can hunt for large, deeply buried treasures with this Aquascan VLF coil for AQ1B detectors.SKU: AQ.3.003R -
Aquascan Submersible Headphones for UW / Land Use (AQ1B)
$299.00Detect even the most subtle sound outputs on land & underwater with the Aquascan Submersible. Configured for AQ1B detectors.SKU: AQ.4.031 -
Aquascan 12" Diver Short Handle (AQ1B)
$92.00Where compactness matters, you can trust this Aquascan 12" handle to exceed expectations. Its for 8" AQ3001; 10" AQ3002; and 15" AQ3003 coils.SKU: AQ.4.003 -
Aquascan 1.5" High Ferrite Power Probe (AQ1B)
Equipped with a 30m reinforced cable, this Aquascan 1.5" High Ferrite power probe for AQ1B reaches deep inside hard-to-access areas.SKU: AQ3043 -
Aquascan Arm Saver
$229.00The Aquascan Arm Saver lets your forearm to comfortably support 38cm Loop for long periods. It fits the AQ1B detectors.SKU: AQ4000
