Garrett MS-3 Z-Lynk Wireless Headphones
Quality Headphones with Built-In Z-Lynk Receiver and High-Fidelity Audio
As with all Garrett products, special care goes into the design and production of the Garrett MS-3 Z-Lynk Headphones. Comfortable ear cushions and adjustable headband guarantee a comfortable fit for every head size. Good wide area of operation; 8 ohms per channel speaker impedance, frequency response: 30-18,000 Hz.
- Speaker Impedance : 8 ohms
- Frequency Response : 30-18,000 Hz
- Strong : USB Charging Cable Included
- Versatility : Folds Down for Easy Storage
- Built-In Z-Lynk Receiver : High-Fidelity Audio
- Build : Comfortable Headband and Ear Cushions
- Volume Control : Adjust Signal Levels to Suit Individual Hearing Requirements and to Enhance Weak Signals
- SKU 14-1627710
- Quick Look Comfort and quality define the Garrett MS-3 Z-Lynk Wireless Headphones. 6 times faster than Bluetooth. Designed for mobility.
- Manufacturer SKU 1627710
- Manufacturer Garrett
- Product Type Headphones
- Headphone Type Headphones
- Wireless Wireless
- Waterproof Non-Waterproof
- Connector 1/4"
Average Experience Rating
Any experience to share?
Your opinion is important to us. Please share your review with our community.Write a review
Review by Ron on September 13, 2020I have owned the Z-Link headphones for almost a year now and I am very pleased. They are easy to hookup and pair the headphone to the transmitter and to also switch the the headphones and transmitter between detectors. I have also purchased a Z-link Transmitter and Receiver Kit for my wife to use between detectors using a corded headphone set and she loves it. I have had zero problems with these units and all I have to do is charge up the Headphone, the 2 Transmitters and 1 Receiver when I get home from detecting. Then everything is ready to go the next time I go detecting. Again, I am very pleased with the Z-Link units and especially the Z-Link headphones. They are very clear, have an easy to use volume control and very are very comfortable. I have no problem wearing this headphone all day in complete comfort and I usually forget that they are on. It is very easy to pair to the transmitter to the headphone by simply pushing one button on the headphone and one button on the transmitter, They usually pair for me in about a second after I push the last button. It can't get any easier than that. What else can I say but have fun!
Review by Lewis on August 20, 2019Pleased
Review by Lewis on August 20, 2019I have owned a set of these headphones for a couple of years. Offer I hunt on the beach at daybreak. They are quite comfortable and sound quality is fine.
Review by Tennessee Trash on July 31, 2019Great quality, good price and work really well. Very pleased. A welcome addition to my AT Pro.
Posted On: 6/24/2021 By: John Gifford
Q: Will these work with the ace apex machine?A: Yes they will.
Posted On: 6/23/2021 By: dennis bowen
Q: will the wireless headphone work on a garrett a/t gold machine.A: They will, but the full kit is required. SKU 14-1627720, https://www.kellycodetectors.com/ms-3-wireless-z-lynk-kit
Posted On: 4/13/2021 By: Jay
Q: I have the Garrett GTI 2500 , It was updated a few ago and will the Garrett MS-3 Z-Lynk Wireless Headphones work on this machine? if so what would I need to do so? JayA: Yes, they would work, you would need the Garrett MS-3 Wireless Z-Lynk Kit https://www.kellycodetectors.com/ms-3-wireless-z-lynk-kit
Posted On: 8/31/2020 By: Brian
Q: I have an AT max and I had the wireless headphones but unfortunately I left them on top of my car one day and drove off and lost them can I just replace the headphones or do I need the whole kitA:
Yes, you can just replace just the headphones.
Posted On: 8/27/2020 By: Ralph Castino
Q: I currently have an AT Pro that is about 4-5 yrs. old. I need to replace my wired headphones and was thinking of going to a wireless headphone. Exactly which headphone would I need?A:
You would need to get the entire Garrett MS-3 Wireless Z-Lynk Kit to go fully wireless.
Posted On: 8/22/2020 By: Jim
Q: What Garrett wireless headphone kit works with the ace300???A:
You would need to get the full kit for the MS-3 headphones to work with your Ace 300.
Posted On: 7/21/2020 By: Brian Smith
Q: Is there any way to plug these into a different brand detector?A:
Yes, you can use these headphones with other detectors. However, you need to have the complete kit and you would probably need the 1/4 inch kit. You can view the kit here.
$127.45Ensure all your metal detectors are wireless-ready with the Garrett Z-Lynk Wireless System for 1/4" headphones.SKU: 1627100
Grab a spare or replacement Garrett Z-Lynk Wireless System for 2-Pin AT Headphones. Simple to set up and easy to use.SKU: 1627110
$552.45This Garrett AT Pro Metal Detector package includes 8.5x11" PROformance DD Search coil and wired, MS-2 headphones. This detector is waterproof to 10ft and is a great machine whether you are searching on land or water.SKU: 1140460
$637.46The Garrett AT Gold Metal Detector was designed with the gold prospector in mind. Perfect for gold hunting in water, but also great for finding relics or coins. Includes 5x8" DD Search Coil and wired MS-2 headphones.SKU: 1140680
$254.95The Garrett ACE 300 Metal Detector comes with 5 search modes, 4 iron discrimination segments, and Digital ID to quickly determine the find.SKU: 1141150
$339.95The Garrett ACE 400 Metal Detector is one of Garrett top performing detectors, great for coin, jewelry, relic, and dry beach hunting.SKU: 1141260
$254.96Enhance your hunting experience with the Garrett Z-Lynk MS-3 Headphones and Pro-Pointer AT Z-Lynk kit.SKU: 1142210
$144.45The all-terrain Garrett Pro-Pointer AT Waterproof Pinpointer works with Z-Lynk wireless headphones and is waterproof up to 20 feet.SKU: 1142200