Gold Digger T-Rex 9.5" Stainless Steel Sand Scoop - 5/8" Round Holes
When Searching for Treasure, Take the King of Wet Sand Scoops; Take the T-Rex. Now with 5/8" Round Holes.
The T-Rex bucket is approximately 11” long by 9 1/2” wide and 4 7/8” deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The handle tube is angled at about 20 degrees so digging is easier than with a straight up and down handle. This also makes the scoop more balanced and feel lighter when hunting out of water. The 5/8" round holes are punched close together to allow for quick sand and small shell release! Some smaller targets that can be missed by larger 5/8” holes. If smaller targets are your main concern then consider our T-Rex 9.5 version with the square 3/8" square holes. There is no push plate on the back of the scoop for more control and better balance when pushing down into the sand. The gauge of the stainless steel is .075” thick for the stress put on the scoop when digging in wet sand. The weight of the scoop is 3.9 lbs. on a postal scale (without the handle). Best of all it is made here in the U.S.A. (The T-Rex requires a wooden handle that can be purchased at your local Home Depot so there is no down time if you should break your handle.)
*Please Note : Handle NOT included. We recommend wood or fiberglass handle only. One can be purchased at any hardware or home improvement store.
- Weight : 3.9 lbs
- Size : 11” x 91/2” x 47/8”
- Holes : 5/8” Round Holes
- Construction : Stainless Steel
Average Experience Rating
Any experience to share?
Your opinion is important to us. Please share your review with our community.Write a review
There are no entries.