Quest Scuba Tector Underwater Metal Detector
with 5x4" Mono Search Coil
The Quest Scuba Tector Metal Detector has quickly become one of the most popular products of 2018 for underwater diving, beach detecting and general metal detecting. The Scuba Tector features a powerful pulse induction (PI) technology and a 5x4” mono coil, allowing for a high level of sensitivity and penetration depth unseen by other models.
The Quest Scuba Tector also provides underwater searching capabilities up to 200 feet (60 meters) with its submersible waterproof housing. The underwater design is perfect for recovering submerged historical relics, rings, gold bracelets and more! Even with its underwater searching technological capabilities, the Scuba Tector remains mobile and lightweight, so detectorists will never get too tired to continue their treasure hunting. The ribbed, ergonomic body of the Scuba Tector offers hunters stability and comfort while detecting.
Featuring a industry first "Dive Mode", users can simply hold the two buttons for 2 seconds on the Scuba Tector for easier operation while underwater. A red light will flash 5 times and a vibration will start. Press the Mode button 3 times quickly to switch back to shallow water hunting mode.
If you are a detectorist that searches both on land and in the water, the Quest Scuba Tector Metal Detector will be an awesome addition to your metal detecting bag of tricks! Included with the Scuba Tector are a micro USB cable for charging the unit, a belt clip lanyard, and two extra rubber bands for the waterproof cap.
Quest Scuba Tector provides a limited warranty to the original purchaser of its products against all defects in original workmanship and material, under normal use and service, for one year from the date of purchase with the following exceptions:
- All warranties void if electronic parts are opened.
- Batteries are warranted for 90 days.
- Cosmetic discoloration of surfaces.
- Water flooding caused from battery cap seal.
Air testing for reference only. Actual detecting distance may vary depends on battery condition, soil condition, and objects material. See below reference:
- Lost Alarm
- LED Flashlight
- Target Locking Function
- Ribbed and Ergonomic Body
- LED / Buzzer / Vibration Alert
- Lanyard Attachment Loop Cap
- Li-Poly Battery Built Inside Shell
- Easy to Use Two Buttons Control
- For 200 ft (60m) Under Salt Water Operation
Average Experience Rating
Any experience to share?
Your opinion is important to us. Please share your review with our community.Write a review
Review by antigrav1117 on May 13, 2019Was concerned about sensitivity due to some other reviews- but after receiving mine and testing, was surprised at the depth and sensitivity. Will detect every test ring I have, plus bracelets and most chains. It would not detect 0.5 oz gold nugget. Ha. I'm ok with that. Air tested a zipper pull to 10". wow. No discrimination mind you- it's a PI, but sensitivity is very good.Very happy.
Posted On: 6/29/2020 By: jim DOLAN
Q: Is the scuba tector have wireless headphones availability?
A: No, the scuba tector does not pair with wireless headphones. The Nokta Makro Pulsedive, however, does pair with wireless headphones. That said, please note that those headphones are not waterproof and currently there are not any wireless headphones that work underwater.