You have no items in your cart.
Kellyco 1/4" Headphone Adapter
Use with Headphones that have a Standard 1/4" Jack Connector. Compatible with Multiple Garrett Models
The new headphone adapter will allow customers to use any brand of headphones that have a standard 1/4" jack connector. One end of the adapter connects securely to the 2-pin connector of the AT Pro Control Housing. The other end of the adapter secures beneath the detectors arm cuff using the existing arm cuff screw. The foam handle grip can be removed by removing the cuff assembly and then carefully sliding the grip off the end of the stem (use a slight amount of moisture if necessary to loosen the grip). Run the adapter through the grip, replace grip and cuff assembly, and then secure all with the arm cuff screw. (Black cable ties can also be used to secure the cable instead of running it through the handle grip.)
*Please Note : Designed primarily for The AT Pro, but will also work with the AT Gold, ATX Series, CSI Pro, Sea Hunter Mark II and Infinium LS. We use the included tie-strap to attach to the upper rod section.
You must be logged in to submit a review. Log in
Review by Fabio R on January 02, 2015
I think it is wonderful you can add the headphone you want to your metal detector, so you can add a very nice and pro headphone of your desire.