Free Vulan 360 Pinpointer

White's Metal Detector Accessories

DFX & MXT Customers Also Purchased:
Call Toll FREE to Order 1- 800- 898- 6673

5 Inch EXcelerator Search coil Cover. Firmly snaps on to the bottom of the search coil for added protection against cuts, slits, and excessive wear. No Need to Remove.  Keeps Coil Clean and Scratch Free. Made in USA from a form fitting high-impact very strong plastic. Very highly recommended. Easily snaps on. No tools required. DOES NOT REDUCE DETECTION DEPTH! Retail $14.95

Only $9.95
New Series 950 Coil Cover Made from a form fitting high-impact plastic. Easily snaps on to protect expensive search coils. No tools required, no need to remove. Keeps your search coil clean from scratches and dents. Fits DFX, MXT, XLT, M6 and BeachHunter ID made after 3-1-2006
ONLY $6.95
Coil Loop Support 5-Position Loop Support attaches to your search coil to keep it at the exact angle you choose which results in deeper detection. Adjusts to any angle, any position without tools. Retail $9.95
Only $9.95
Rain and Dust Cover for Meter ID System Protect your investment... don't let rain & dust reduce your detecting power.  Features easy on and off Velcro fasteners, clear-view panels that allow you to see the meter and adjust the settings.  Gives you protection from rain, mist, swirling dust, dirt, mud, etc. Click Here for All Made White's Rain & Dust Covers
Razor Tooth Gator Digger Tears through the hardest and most stubborn soils with ease.  14 massive razor edge cutting teeth cuts through roots, hard clay, composite soils that literally "stop" other diggers.  Triple tempered steel blade welded through to handle. No slip blade guard. Blade 7.85" X 2" wide. Overall length, 12.6". Includes very strong Dura-Pro II cordura carrying sheath with belt loop. Retail $69.95
SALE $59.95
Over 6 feet tall? Tall Man Rod highly recommended for comfortable searching. Lower Tall Man Fiber Rod. Lower rod section 10 inches longer than standard size.  No need to hunt "bent over". Lets you keep search coil at proper height for deeper searching.
Callverse
For special prices


Search coils (Loops) and Protective Coil Covers
For DFX & MXT - "EXTRA DEEP SEEKING."

18" EXcelerator
Retail $450.00
Sale $249.95
18" EXcelerator Search coil (DFX, MXT, M6)
The 18" EXcelerator Search coil is the finest search coil in the EXcelerator search coil series. Test reports from average metal detector owners who have tested this coil have been even better than the manufacturer claimed. Compared to the outstanding 14" size which is considered exceptionally deep without loss of sensitivity on small items, the 18" has become the favorite of everyone who has participated in the testing of this amazing search coil. Imagine the thrills of finding single coins 20" to 22" deep. This is in addition to the 18 inch size still having the sensitivity to find tiny earrings smaller than a dime being found at 10" to 12" deep. HUGE amounts of relics and artifacts have been recovered from areas that were pounded by detectors year after year after year and were considered absolutely "worked-out". The 18 Inch EXcelerator coil proved them all wrong! 
Click here for more information, pictures and prices

12.5" EXcelerator
Retail $360.00
Sale $199.95
12.5" EXcelerator Search coil (DFX, MXT, M6)
One of the first "Increased Size" search coils, the 12.5" has generally resulted in adding 25% to 40% more depth versus a standard factory search coil. The 12.5" EXcelerator search coil does not stop at 25% or even 40% increased depth but has been reported single coin recoveries at 50% and in some cases almost doubling the depth of standard factory search coils. Use the 12.5" EXcelerator to recover even the smallest and thinest coins which are difficult if not impossible for other coils to locate. Not only have field tests shown an increased sensitivity to smaller, deeper items but more good targets were found with more frequency even in areas that have been thoroughly searched with many different detectors. 
Click here for more information, pictures and prices
 

10x14" Elliptical Double D Excelerator EQ2 Pro Search Coil
Retail $350.00
Sale $179.95
10 x 14" Elliptical Double D Excelerator EQ2
Pro Search Coil

For White's DFX,MXT,M6 and Minelab Explorer,Quattro.
The 10 x 14" EXcelerator search coil is the perfect choice for the treasure hunter looking for the best combination of maximum depth and maneuverability in most hunting conditions. This new coil performs like a much bigger round style coil but at a reduced weight because of its elliptical shape. A very stable coil in high mineral grounds and will easily detect Deeper coins and relics
Click here for more information, pictures and prices

8" EXcelerator
Retail $290.00
Sale $189.95
8" EXcelerator Search coil (DFX, MXT, M6)
Now you can maximize your depth to find older more valuable coins in all types of soils, even on mineralized beaches. Use it to make amazing recoveries in trashy areas that "block" other coils. The optimum 8 inch size gives you the perfect coil to smoothly cover open grounds, yet small enough to use in places of heavy brush and vegitation. This is a "Go Anywhere - Do Anything" search coil! Click here for more information, pictures and prices

6” EXcelerator EQ2
Pro DD Search coil.

Retail Price $245.00
"Bargain Center"
Only $124.95
6” EXcelerator EQ2 Pro DD Search Coil
For White's DFX,MXT,M6 and Minelab Explorer,Quattro.
The 6" EXcelerator was specifically designed for maximum depth on small to medium size coins, rings, gold nuggets and relics. The size offers a good compromise between search coils that are slightly smaller and larger in higher mineralized grounds.This small coil will amaze you at its depth on even the smallest of targets.

Click here for more information, pictures and prices.

5" EXcelerator
Retail $200.00
Sale $119.95
5" EXcelerator Search coil (DFX, MXT, M6)
The 5 Inch EXcelerator coil is masterful in searching out older more valuable coins in "worked out" areas. Thin necklaces and bracelets that are virtually impossible for other detectors and larger coil sizes to locate are usually found by the 5 inch EXcelerator. Rings are no match for this dynamic search coil. Small rings, gold rings, diamond rings are now being found!  Click here for more information, pictures and prices

5" EXcelerator
Coil Cover
5" EXcelerator Coil Cover
Firmly snaps on to the bottom of the search coil for added protection against cuts, slits, and excessive wear. No Need to Remove. Keeps Coil Clean and Scratch Free.
Made in USA from a form fitting high-impact very strong plastic. Very highly recommended. Easily snaps on. No tools required. Does not reduce detection depth!
Retail $14.95
Sale $9.95 (Ships Free when ordered with 5-Inch Coil OR Add $5.95 Frt)
Fits ALL 5" EXcelerator Search coils (White's, Minelab, Garrett, Etc.)

4.5 x 7"Excelerator Search Coil
Retail $350.00
Sale $195.00
4.5 x 7" Excelerator Search coil (DFX, MXT, M6)
For White's DFX/MXT and Minelab Explorer/Quattro.
This new 4.5 x 7" EXcelerator is a true to it's physical size, has very good coverage and depth detection.This coil can be worked in and around, under and in between many obstacles. It can be used for general hunting if you don't want to use the 5 or 8". Find coins, jewelry, relics, rings, etc. 4.5 x 7" size gives you the width of a 5" coil, length of an 8" coil plus added depth... it's like using 2 coils at the same time.
Click here for more information, pictures and prices

>
Search Coils (Loops) and Protective Coil Covers

Super 12 Spider loop
Retail Price $249.95
White's Super 12 Spider Loop Powerful new Super 12" concentric (DFX, MXT, M6) enhances the deep-seeking ability of E-Series detectors. Deep detecting to find those deeper, older, more valuable treasures. 52 inch shielded cable with molded 5-pin connector.Super Strong construction, Open Spider design reduces weight so you can Metal Detect longer without fatigue, weight of Super 12 coil including cable 1.2 lbs.. Fully shielded coil the Super 12 is waterproof and submersible. Warranty 2 years
Callverse
For special prices
Cat#960-8013229
Click here for more information.
Coil Cover
SUPER 12 Open Web 300mm Loop Cover
SUPER 12 Open Web 300mm Loop Cover Fits Dull Black 300 series 12" loop (2009) Best for water and manicured lawns, open Spider Web.
Cat# 960-50141282
Callverse
For special prices

9" Spider search coil
Retail price $119.95
Whites 9 inch Spider Search Coil.
White's has done it again! They've designed an all new 9" Spider Search Coil for the Classic 4 and Classic 5 ID model metal detectors. This new spider coil features an open design and is epoxy filled to be less buoyant and offer less resistance while sweeping. The open design is incredibly accurate for pinpointing even the smallest target and since this coil is completely submersible it's great for taking into shallow rivers and edges of lakes or oceans. Replace the 9.5" Search Coil on your Classic series metal detector and change how you metal detect in an instant!
Callverse
For special prices
Cat# 960-8013231

9" Spider coil cover
Whites 9 inch Spider coil cover Easily snaps on bottom of search coil to protect your expensive coil. Gives added protection against cuts, slits, and excessive wear. No Need to Remove. Absorbs shocks and moist grass static. Keeps Coil Clean and Scratch Free. No tools required. DOES NOT REDUCE DETECTION DEPTH!
Callverse
For special prices
Cat# 960-50141312

Eclipse 5.3
Retail Price $149.95
Eclipse 5.3    A New Reason to Hunt With the V3, V31, DFX, MXT, and M6!
You asked for it!! Everything you love in a 6 inch loop, now built to maximize the depth and precise target information you get only from DFX.  Use this companion loop to get the most from DFX's ability to find the good stuff in areas littered with trash. Optimum target separations, superb pinpointing.  This is the accessory loop you'll use in parks, on the beach, yards, and more. (For V3/V3i/DFX/MXT/M6 ONLY)

Callverse
For special prices

Bullseye 5.3 Loop
(Not for DFX, MXT)
Retail $119.95
Fits XLT, 6000XL, QXT, IDX, ID, CL III, 5900. Maximum separation in high trash areas. Has the ability to work close to metal buildings, metal fences, sidewalks, etc.  Recommended in high trash areas. Separates good targets easier.
Callverse
For special prices
Coil Cover
5.3 Search Coil Cover
Cover for 5.3 Search Coil Fits Eclipse 5.3 and Bullseye 5.3 (loop) Search Coils. No extra tools needed! Does not decrease detection depth.
Callverse
For special prices
Cat# 960-5014067
 Eclipse Deepscan DD 1400
14" Eclipse Deepscan

 

DFX/MTX/M6 Eclipse Deepscan DD 1400.
A powerful new detecting tool! This 8" X 14" coil is designed to enhance the deepseeking ability of DFX, MXT, and M6 especially over difficult (mineralized) ground. DD coil construction reduces 75% of ground mineralization.
Callverse
For special prices

Eclipse DD
10" x 6"
Retail Price $179.95
Eclipse DD  10" x 5.5" A New Reason to Hunt With the DFX, MXT, and M6!
Here's the elliptical loop that gives you the stability and accurate VDI numbers to hunt those heavily mineralized and black sand areas.  Cancels the ground in even the worst ground conditions and iron-infested areas.  Now, take advantage of DFX's target separation capabilities in extreme soils and find the deepest relics, coins and jewelry! (For DFX/MXT/M6 ONLY)

Callverse
For special prices

Eclipse 4 x 6 Loop

Retail Price $149.95
Fits V3, V3i, DFX, MXT, M6.  Elliptical 4 x 6 inch "DD" design provides superior performance in extreme ground, better sensitivity to physically smaller metal targets, performance in extreme trash and physically smaller foot print for working around obstacles.  Longer but narrower detection window compared to similar sized search coils. Finds the good stuff in areas littered with trash. (For V3/V3i/DFX/MXT/M6 ONLY)
Callverse
For special prices
Blue Max 4 x 6 Shooter DD Search coil
Retail Price $149.95
Fits XLT, XL Pro, QXT, IDX, CL ID, and Classic III.  Elliptical 4 x 6 inch "DD" design provides superior performance in extreme ground, better sensitivity to physically smaller metal targets, performance in extreme trash and physically smaller foot print for working around obstacles.  Longer but narrower detection window compared to similar sized search coils. Finds the good stuff in areas littered with trash.
Callverse
For special prices
Mini 4x6 DD Loop Cover
Fits all Mini 4x6 DD Loops Made from a form fitting high-impact plastic.  Easily snaps on to protect expensive Search coil. No tools required, no need to remove.  Keeps coil clean and scratch & dent free.
Callverse
For special prices

Blue Max 350 Loop Cover
Fits Blue Max 350 Loop Made from a form fitting high-impact plastic.  Easily snaps on to protect expensive Search coil. No tools required, no need to remove.  Keeps coil clean and scratch & dent free.
Callverse
For special prices

8 Inch Blue Max 800
(Not for DFX, MXT)
Retail $119.95
8 inch loop works with XLT, 6000XL, QXT, IDX, ID, CL III, 5900. Recommended in high trash areas. Separates good targets easier. Slightly larger than 6 inch coil. Covers more ground in less time.
Callverse
For special prices

Blue Max Coil Cover
Blue Max 950 Coil Cover Fits ALL 950 search coils. (loops) Made from a form fitting high-impact plastic.  Easily snaps on to protect expensive Search coil. No tools required, no need to remove.  Keeps coil clean and scratch & dent free. Fits White's Models Made Before 3-01-2006
Callverse
For special prices

New Series 950 Coil Cover.
Made from a form fitting high-impact plastic. Easily snaps on to protect expensive search coils. No tools required, no need to remove. Keeps your search coil clean from scratches and dents. Fits DFX, MXT, XLT, M6 and BeachHunter ID made after 3-1-2006
Callverse
For special prices

8" Coil Cover

8" Coil Cover Fits Classic & 5 ID. Easily snaps on bottom of search coil to protect your expensive coil. Gives added protection against cuts, slits, and excessive wear. No Need to Remove. Absorbs shocks and moist grass static. Keeps Coil Clean and Scratch Free. Made in USA from a form fitting high-impact plastic. Very highly recommended. No tools required. DOES NOT REDUCE DETECTION DEPTH!

Callverse
For special prices Cat# 960-5010026


Accessories

White's Padded Gun Style Detecting Bag
Retail price: $49.95

White's Padded Gun Style Detecting Bag. Fits all MP Series Detector. Carry your Metal Detector without taking it apart. Plenty of room for accessories and extra search coils. Large 8x10" outside pocket (behind White's Logo) to carry digging tools. Full length zipper makes it easy to load and unload.

Callverse
For special prices
Cat# 960-6011205


Deluxe Padded Gun Style Carrying Bag
Retail price $89.95

Sale price $59.95

A super tuough corduroy nylon padded carry bag. Double rolled stitching that makes up a super strong bag throughout, comes with a heavy duty carry handle and a convenient outside pocket, easy pull zipper. Size 18x53" (outside dimensions).

Cat# 495-bag-bx


All in One Carrying Bag
Retail price $79.95

Sale price $59.95

18x52" Tough Nylon with reinforced stress points and smooth slide rust resistant zipper. Fits all models including "s" rod and "sl" type detectors fully assembled. One end is rounded to handle coils to 12". Has outside pocket 7x9" with Velcro closing strip. Has two reinforced Nylon carrying handles.

Cat# 64-44185l


Universal Compact Case
Retail price $99.95

White's hard shockproof case fits DFX, XLT, MXT, M6, Classic 5ID, GMT, Sierra Madre, QXT and 6000 XL. Requires disassembly of detector. Outside dimensions are 21x14x7.5" Note: This case does not fit the DFX 300, MXT 300 Pro or the Classic 4. Shipping charge $14.95

Callverse
For special prices Cat# 960-60111581

Rain and Dust Cover for Meter ID System Protect your investment... don't let rain & dust reduce your detecting power.  Features easy on and off Velcro fasteners, clear-view panels that allow you to see the meter and adjust the settings.  Gives you protection from rain, mist, swirling dust, dirt, mud, etc. Click Here for All White's Rain & Dust Covers
Rechargeable Battery System
Retail price $74.95

Sale price $67.95

For DFX/XLT, Classic Series (4 & 5ID), MXT, M6 and GMT series only. Complete with drop in rechargeable battery pack. Non-memory rechargeable batteries included. Also includes a combo charger with both overnight and fast charge options.

Callverse
For special prices Cat# 960-5090023

Bullseye II Probe
Retail price $119.95

Sale price $99.95

This probe works side by side with your metal detectors. It's easy. It's fast. Just locate the target with your detector, push the button and "zero in" on the target's exact location.

Callverse
For special prices
Cat# 960-8120003


Coil Loop Support
Retail price $19.95
Sale price$14.95

Five position loop support attaches to your search coil to keep it at the exact angle you choose which results in deeper detection. Adjusts to any angle, any position easily without tools.

Cat# 1-030


Optional Fiber
Lower Rod

Retail $14.95

Perfect when used with your other sized search coils. Attach lower shaft to each search coil. Allows coil changes in under one minute. Highly recommended to always have as a "spare" if original lower shaft splits or breaks.

Callverse
For special prices Cat# 960-50002421


Lower Tall Man Rod

Retail $19.95
Code #960-50002423
Over 6 feet tall? Tall Man Rod highly recommended for comfortable searching. Lower Tall Man Fiber Rod. Lower rod section 10 inches longer than standard size.  No need to hunt "bent over". Lets you keep Search Coil at proper height for deeper searching.
Callverse
For special prices

SL Tall Man "S" Rod
Retail $24.95

Lengthened version of the Standard "S" rod for use with any SL model and SL Style hipmount rod. (11" longer than standard).

Callverse
For special prices
Cat# 360-50002401

The Anderson White's shaft is 39” long with an adjustable handle and arm cuff. This is a well balanced upgrade from the factory S style rod. There is also two mounting posistions for the detector housing . Shafts fits the Beach Hunter ID, Surf PI Pro, and other machines with 2.5” hole spacing. Must use your factory lower rod (not included)
Only Price $119.99
$12.95 required for shipping.

Razor Edge Gator Digger
Retail Price $69.95

Sale price $54.95

Toughest digging tool made. Tears through the hardest and most stubborn soils with ease. 14 massive razor edge cutting teeth cuts through roots, hard clay, composite soils that literally "stops" other diggers. Triple tempered steel blade welded through to handle. Int'l orange handle with no-slip blade guard. Blade 7.85" X 2" wide. Overall length, 12.6".

Cat# 64-2530


Sidekick Pouch
Retail Price $29.95

Sale price $19.95

Constructed of  heavy vinyl with strong, durable side seams. Extra deep pocket safely holds recovered coins and valuables. Waist belt with quick release buckle fits all sizes. Velcro leg strap holds recovery pouch comfortably in place. "Sidekick" even has a drain hole in the bottom for water use. This is our best seller. 8"x 11.5", top opens 3".

Cat# 825-11


"Metal Detecting Hobby" Book
Retail Price $9.95

Sale price $6.95

This is your opportunity to learn from an experienced, seasoned detectorist. Dick relates the benefit of his own experiences. In this edition you will see that the use of the Internet has been a boon to the detectorist, and access to treasure has never been so close to hand. In this book there are mentions of websites that could help you better find treasures, give tips, etc. If you are new to the treasure hunting hobby or a pro, you probably have questions...hopefully this book will give you the answers.

Cat# 960-6210367


Videos
White's on TV!
Now Get "White's Treasure Hunting America" on a 2 Disk DVD!

Thirteen half hour tv episodes produced for the Outdoor Channel2. They feature everyday treasure hunters discovering artifacts and rare metals around America. Each episode features two to three treasure hunters from California to New York. Packed with treasure hunting tips, history of our country and where to find the best treasure.

• Great finds!
• Different episodes each week!
• Legends of lost treasure!

White's Treasure Hunting America features White's detectorists from all over the country. It is airing on the new Outdoor Channel 2 HD, which is not yet readily available on most cable and satellite systems.
Only $29.95
Cat# 960-6011218