The new headphone adaptor will allow customers to use any brand of headphones that have a standard 1/4 inch jack connector. One end of the adaptor connects securely to the 2-pin connector of the AT Pro Control Housing. The other end of the adaptor secures beneath the detectors arm cuff using the existing arm cuff screw. The foam handle grip can be removed by removing the cuff assembly and then carefully sliding the grip off the end of the stem (use a slight amount of moisture if necessary to loosen the grip). Run the adaptor through the grip, replace grip and cuff assembly, and then secure all with the arm cuff screw. (Black cable ties can also be used to secure the cable instead of running it through the handle grip.)
**Please Note: Designed primarily for The AT-Pro, but will also work on the SeaHunter Mark II and Infinium LS. We use the included tie-strap to attach to the upper rod section.