Metal Detectors Super Store

Explorer SE Metal Detector
Unmatched for Depth & Sensitivity

This third generation Explorer surpasses anything you've seen for depth, sensitivity and superior discrimination!

Whats new about the Explorer SE Metal Detector?

With the Explorer SE you can now discriminate targets in the digital screen using the dual coordinate ferrous and conductivity digital display, giving you over 1000 pre-programmed target signatures. Explorer SE's dual coordinate digital display is the most advanced target ID system on the market today. Not only will you be able to predict the type of coin underneath the coil, you might also be able to guess the coin's date!

The Full Band Spectrum (FBS) circuit automatically transmits multiple frequencies simultaneously. The increased frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This allows the Explorer SE to analyze more target information so that the Target Identification (ID) is more accurate.
Ground balancing is automatic with Minelab's advanced digital filtering. Whatever field conditions you encounter, from dry clay to wet black sand or rich loam, Minelab will find what you're looking for. Minelab's unique FBS technology means deep, sensitive, accurate detecting.

Download manual - English

Turn on the detector

Power

Press NOISE CANCEL
After 30 seconds electrical interference will be reduced

Noise
Cancel

Go Detecting!

Have Fun!

What else is new about the Explorer SE Metal Detector?
• Faster and more powerful microprocessor with lower power consumption makes the Explorer SE more responsive. Spend more time detecting; less time programming and recharging
• Menu structure giving easier access to key functions makes Explorer SE programming a breeze. Fast learning curve; intuitive, easy-to-learn interface.
• Audio modulated pinpoint mode making target size and depth identification more reliable. Save valuable time recovering targets.
• Simplified Iron Mask coordinates 0-31 with full ferrous discrimination capability. Easy correlation of Iron Mask settings with digital readout values; more user friendly function; simplifies use of Iron Mask.
• Audio tone settings with new "Pitch Hold" mode for picking up even the faintest of target signals. Improved recovery rate for the smallest or deepest targets.
• Quickstart settings make the learning curve on the Explorer SE a more rewarding one.
• New finer threshold and volume adjust controls. Fine tune "Threshold" and "Volume" to perfectly match operating conditions. More accurate and comfortable settings.
• Improved threshold stability in noisy/trashy environment. Less false signals; cover more ground faster.
• Larger target coordinates in digital screen and improved menu fonts. Easy to read user interface.
• Improved weight and balance with new lightweight waterproof coil; comfortably detect for longer periods of time without fatigue.

The Unique Technology of the Explorer SE

Most detectors on the market operate on a single or dual frequency, ranging from 1 to 70 kilohertz (kHz). Although this technology has served the industry well for years, Minelab found that a frequency that worked well in one area would often offer only marginal performance when used in another location. Ground mineralization, trash content and target size all had an effect on how effective a detector transmitting a single frequency would operate.

FBS technology combines Minelab's existing multiple frequency BBS technology with a powerful new microprocessor to give: Greater detecting depth • High sensitivity over a wide range of targets • Less interference from electromagnetic sources • More accurate identification of target characteristics.

Pinpointing with the Explorer SE

The exact location of a target can be located by using pinpoint. Enabling pinpoint instructs the detector to temporarily disengage "Discrimination Patterns" and become a non-motion detector, therefore targets normally discriminated against will emit a signal when underneath the coil.
In Pinpoint, the detector gives a continuous audio response. This response will get louder as the coil passes directly above the target.

Features
MineLab Warranty	2 year warranty
Transmission Technology	Full Band Spectrum (FBS) 28 Simultaneous Frequencies ranging from 1.5kHz - 100 kHz
Number of Frequencies	28 Simultaneous Frequencies
Microprocessor	New technology processor - faster and more powerful
Software	3rd Generation Software - improved user interface
Ground Balance Modes	Auto Ground Compensation - Advanced Digital Filtering
Target Identification	2 Dimensional SmartfindT Size / Conductivity and Ferrous characteristics
Audio Tone Identification	Constant to Multi-tone; customizable Conductivity / Ferrous
Audio Tone Settings	3 Settings: Long, Smooth, Pitch Hold
Discrimination	2 Dimensional SmartfindT Discrimination
Iron Mask	Simplified Iron Mask coordinates 0-31 with full ferrous discrimination capability
Depth Indicator	Yes; Now also updates in pinpoint mode
Sensitivity Adjustment	2 Settings: Semi-Automatic & Manual 1-32
Noise Cancel	Automatic & Manual
Pinpoint	Non-motion modulated audio for improved target size and depth identification
Low Battery Audio Alarm	Yes
Batteries	1600 mAh NiMH or Alkaline batteries
Coil	Lightweight 10.5" Double D (DD) waterproof coil
Visual Display	64x128 pixel LCD panel with improved graphics
Headphone Input	0.25 inch Stereo Jack
Threshold	Finer adjust level; improved stability in high-trash
Recovery Speed	Selectable (Fast & Deep)
Patents	US 4890064; US 5537041; US 5506506
Optional Accessories
Coils	8" FBS Coil with Lower Shaft
Battery	1800mA/H NiMH Battery Pack; 'AA' Housing Battery Pack
Charger	12V Car Charger

Click Here for Field Test Report