Hablamos Español
- Home »
- Lorenz Metal Detectors »
- Deepmax X6 with 2 Coils
Lorenz Deepmax X6 with 2 Coils
w/ 14" (35cm) DD Coil & 40"x40" (1x1M) Frame Coil plus a built-inData Logger & additional GPS-Module
Important Information:
The X6 Data Logger is a built-in feature of the Deepmax X6 ONLY!
- Six channel data acquisition:
- three Delay channels
- two Ground channels
- one Target Classification channel
- Storage media: USB-Stick (2.0)
- Number of fields (one USB-Stick only): 99
- Sampling rate 16 samples per second
- Resolution: 24 bit
- Supported by GPS
After collecting field data the Surfer 8 Software easily and accurately transforms the data stored on the USB-Stick into colour, contour, surface, image or vector maps on a computer in minutes. An additional Scripter Software will therefore automatically generate twelve maps with each field. Six are two-dimensional and six three-dimensional. The operator can therefore choose between different gridding and mapping methods.
The new Data Logger Hard- and Software developed by Lorenz Detecting Systems is first of all easy to use, very accurately working and affordable.
Only a few controls of the DEEPMAX X6 will make data acquisition a pleasure for both beginners and professionals like engineers, geologists,
archaeologists, scientists and many more. The users will investigate mainly for waste disposal, meteorites, unexploded ordnance, or lost aircrafts.
No non-sense functions will confuse the operator. Six different maps will be generated simultaneously when covering the ground with multiple tracks. Each scan/ map is different depending on the electronic analysis method and therefore will not only give different sensitivity ranges but can be the key to the probable kind of metal buried in the ground. There is clearly a difference in the signature metal objects and ground conditions will give for example. Areas of disturbances in the scans will directly lead to the different metals or ground signals and therefore can be classified in some ways. The operator therefore can use the different scans to his advantage in order to choose between the targets of most interest only by comparing the different scans/ maps. Three delay channels will produce maps with different sensitivity to small and large metal objects. Two ground channels will enable the operator to generate maps with no ground response but Z dimensions and directions for different decay curves of the eddy currents produced in a metal object. In addition the target classification channel will display the delay of the eddy currents of each signal with a certain intensity to give further information on the probable kind of metal in the ground.
No matter how strong the ground is mineralised or how many different metals are located in close proximity, this new device will ensure very
good results even with difficult surrounding conditions. Faults produced by the operator or the environmental conditions like overload signals
from nearby metal objects for example will be immediately seen when comparing the six channels. For the professional users additional Hard- and Software
will be available for storing positioning data from GPS and several DEEPMAX X6 detectors. Although the detector can be used with smaller search heads
the data logger function is mainly developed for larger metal objects being at least 6cm x 6cm in size. Therefore frames of 1m x 1m or even bigger should
be in use to achieve best results.
Transmitting Phase
- Magnetic Field Of Coil
- Current Through Coil
- 1m x 1m Coil
- Soil
- Gold Bar
- Eddy Current
- Coin Chest
Receiving Phase
- Magnetic Field Of Coil
- 1m x 1m Coil
- Soil
- Eddy Current
- Gold Bar (Found)
- Coin Chest (Found)
Eddy currents produced in a metal object by means of a pulsed primary field, will die away differently depending on the conductivity of the metal object. The classification circuit therefore gives a visual time delay reading for the eddy currents received over a certain period of time. In addition a ferrous / non- ferrous indication for every metal being detected is working when a double D coil is in use. This gives further information on the probable kind of metal being located as well as the audio sound emitted, which makes it easy to predetermine the exact place and the size of the buried metal object.
The Pulse GBS principle has got the advantage of using large diameter coils and high transmitting power. This is especially necessary when searching at depth.Frame mounted cable coils of different size and shape can be connected to the Lorenz Deppmax X5/X6 without any adjustments.
A special adaptation circuit has been added to the Detector to suit with different coil systems automatically. This ensures extreme
depth capabilities with any coil connected. When enlarging the search coil diameter the sensitivity to bigger objects will also rise. At the same time
smaller objects will be located less sensitive. This is particularly desirable when locating large objects while ignoring small bits. Large coils offer
very high detection ranges. Even in difficult soils where magnetic iron oxides are present the Lornez Deepmax X5/X6 will offer extreme depth capabilities
for both ferrous and non-ferrous metal objects when the Ground Balancing System is in use. Other systems often suffer from ground effects which reduce the
depth range in the ground.
The Lornez Deepmax X5/X6 will be able to locate objects at almost the same depths either in most types of ground or "in air tests". The high sensitivity of the Lornez Deepmax X5/X6 to non- ferrous metal objects like gold, silver and copper together with the new target analysis make this detector an outstanding device for many different locating purposes. The Lorenz Deepmax X5/X6 was developed to provide a number of features including high sensitivity and stability together with easy operation. The amount of controls was therefore reduced and a calibration of the Detector to our factory settings was also made to guarantee best results in the field.
The Lorenz Deepmax X5/X6 was developed for professional search and locating applications. A variety of search coils can be connected to this metal detector. Large areas can be detected effectively especially with frame coils. Saltwater, most types of ground or temperature changes will only slightly affect the detection range of the Lorenz Deepmax X5/X6. It is possible to eliminate some unwanted objects like nails and foils or to identify them as being small unwanted objects while searching for bigger and deeper objects. In conjunction with small coils the Lorenz Deepmax X5/X6 is a great tool when searching for small objects deep in the ground.
- Highly sensitive to all kinds of metal
- Stable operation on mineralised ground or salt water with Pulse Ground Balancing System
- Reliable / simple operation
- Exact pinpointing with large coils
- Very easy and effective detection of large areas
- Rugged, refined mechanical construction
- A variety of search coils are available for different detection purposes
- Automatic adaptation of different coil sizes to the electronics
- Small unwanted metal objects can either be identified or eliminated
- Fast audio response speed with voltage controlled oscillator (VCO)
- Logarithmic audio response and intensity bar graph reading for easy pinpointing
- Battery check with audio alarm tone
- Calibrated static (non-motion) target classification with visual time delay reading
- Improved ferrous / non-ferrous identification which is less affected by the ground
- Precisely adjustable audio-threshold
- Stable static response (acoustical and visual)
- Waterproof search coils
- Interchangeable rechargeable Batterypack
- Charge electronics with interchangeable AC-plug for world-wide operation
- Frequency control for interference elimination
- Automatic push button retuning facility
- Different Delay and Sensitivity settings to eliminate small objects or for easy pinpointing
- Extreme detection depths for very large metal objects
- Optimal performance for the detection of small objects like coins or other non-ferrous objects as well as for bigger objects buried deep.
- Single or dual induction balanced or differential coil designs can be used.
- Multi sensor detection (MST) with several searchcoils working at the same time without interfering each other. Please ask for details.
- Easy to use data logger function (built-in the Deepmax X6 only)
Works with additional Hard- and Software to generate six 2D image and six 3D surface maps from the scans being taken. Each map is
different depending on the electronic analysis method and therefore can be the key to the probable kind of metal buried in the ground. There is clearly
a difference in the
signature different metal objects and ground conditions will give. The same are displayed on a two or three dimensional surface or image map according
to the available GPS module and USB storage media. This Hard- and Software kit is only available with the Deepmax X6 - New GPS based meter, Track, Field and compass
- New search system with new LC Display and all new functions
- Signal strength bar graph, time delay reading, ferrous / non-ferrous icons, battery condition and all the mode settings are displayed simultaneously on a large LC Display
- New improved searchcoils available
- More stable ground balancing functions for less interference in urban areas
- Improved AUTO function which gives with most targets only one indication instead of two when ground balancing system is selected. In addition different self tuning and Filter settings will help to make the unit even more stable.
- Completely New GROUND balancing systems with DD coils gives additional depth to small and large non- ferrous metal objects.
- Automatic false finding target identification.
*Detection Depths
| Search Coils | 26cm / 10.25" Coil | 35cm / 14" Coil | 45cm / 18" Coil | 40x40" frame square | 40x40" double frame square |
| Gold nugget Diameter = 5 mm / 0.5" |
15cm / 6" | 15cm / 6" | X | X | X |
| Silver coin Diameter = 1.3 cm / 0.5" |
22cm / 9" | 22cm / 9" | 20cm / 8" | X | X |
| Gold nugget Diameter = 2 cm / 0.8" |
29cm / 12" | 33cm / 13" | 31cm / 12.5" | X | X |
| Silver coin Diameter = 2.5 cm / 1" |
35cm / 14" | 40cm / 16" | 42cm / 17" | X | X |
| Brass plate 10x10cm / 4x4" |
75cm / 30" | 85cm / 34" | 95cm / 38" | 135cm / 54" | 160cm / 64" |
| Softdrink can .33 | / 3x6" |
80cm / 32" | 90cm / 36" | 100cm / 40" | 130cm / 52" | 160cm / 64" |
| Brass plate 20x20cm / 8x8" |
100cm / 40" | 110cm / 44" | 125cm / 50" | 180cm / 71" | 230cm / 91" |
| Iron box 30x18x15cm / 12x8x6" |
130cm / 52" | 145cm / 58" | 165cm / 65" | 240cm / 95" | 320cm / 126" |
| Small fuel tank 20 | / 5.6 Gallons" |
150cm / 60" | 165cm / 65" | 190cm / 75" | 280cm / 111" | 370cm / 146" |
Detection depths recorded in medium air; | X = outside the range of the coil.
*Note: depths will vary with soil conditions
