Lorenz Detectors

Lorenz Metal Detectors

Find Gold and Silver Treasures 25 to 40 Feet Deep

Lorenz X5 and X6 professional series detectors are used to detect single coins, buried caches, and hidden gold and silver treasures at incredible depths. Lorenz deep searching metal detectors are easy to use. After setting a few controls to the factory recommended settings you then simply press the ground balance button with the search coil in the air. After proper ground balance is achieved you set the threshold level and start scanning*.

Lorenz X series detectors ignores practically all types of ground minerals. Both Lorenz Pulse induction detectors are capable of detecting coins, gold, silver, brass, bronze and larger targets to extreme depths. Lorenz (deep) metal detectors are pulse intermittent transmission types. This DeepMax signal is amplified and conditioned to drive the detection signal deep into all soils! A highly accurate conductivity meter reading system helps identify the type of metal found. With Lorenz, deep treasure can now be found beyond the depths of standard metal detectors! DeepMax X6 also comes with a built-in 3D data logger and additional GPS module with USB storage media for the ultimate Treasure hunting package!
* see instruction manual for additional details on operation.

Click Here to Read More
Lorenz Metal Detectors Have Kellyco's Exclusive 120% Price Guarantee!
w/ 14" (35cm) DD Coil & 40"x40" (1x1M) Frame Coil
Retail $10,999.00
ONLY $5,499.50
Sold Out
w/ 14" (35cm) DD Coil & 40"x40" (1x1M) Frame Coil
Retail $12,999.00
ONLY $6,499.50
Sold Out
Transmitting Phase
Transmitting Phase
  1. Magnetic Field Of Coil
  2. Current Through Coil
  3. 1m x 1m Coil
  4. Soil
  5. Gold Bar
  6. Eddy Current
  7. Coin Chest
The Lorenz Deepmax X5/X6 is based on the nonmotion; Pulse GBS (Pulse Ground Balancing System). Short & intensive magnetic pulses are emitted by means of a search coil first. Those magnetic pulses produce eddy currents in conducting materials like metal objects for example. These eddy currents will be kept in a metal object and will die away after the magnetic pulse emitted by the search coil has turned off. This is the reason why it is possible to detect those eddy currents during the time delayed receiving phase by means of the same search coil which now acts as a receiving coil. A electronic circuitry is necessary to detect those tiny voltage changes and has to separate that particular signal from interference also received.The signal has to be amplified to drive a voltage controlled oscillator (VCO), which emits an audible signal either by headphones or built-in loudspeaker when a metal is in the near of the field of the coil
Receiving Phase Receiving Phase
  1. Magnetic Field Of Coil
  2. 1m x 1m Coil
  3. Soil
  4. Eddy Current
  5. Gold Bar (Found)
  6. Coin Chest (Found)

Eddy currents produced in a metal object by means of a pulsed primary field, will die away differently depending on the conductivity of the metal object. The classification circuit therefore gives a visual time delay reading for the eddy currents received over a certain period of time. In addition a ferrous / non- ferrous indication for every metal being detected is working when a double D coil is in use. This gives further information on the probable kind of metal being located as well as the audio sound emitted, which makes it easy to predetermine the exact place and the size of the buried metal object.

The Pulse GBS principle has got the advantage of using large diameter coils and high transmitting power. This is especially necessary when searching at depth.Frame mounted cable coils of different size and shape can be connected to the Lorenz Deppmax X5/X6 without any adjustments.

Lorenz Deepmax X5 in use A special adaptation circuit has been added to the Detector to suit with different coil systems automatically. This ensures extreme depth capabilities with any coil connected. When enlarging the search coil diameter the sensitivity to bigger objects will also rise. At the same time smaller objects will be located less sensitive. This is particularly desirable when locating large objects while ignoring small bits. Large coils offer very high detection ranges. Even in difficult soils where magnetic iron oxides are present the Lornez Deepmax X5/X6 will offer extreme depth capabilities for both ferrous and non-ferrous metal objects when the Ground Balancing System is in use. Other systems often suffer from ground effects which reduce the depth range in the ground.

The Lornez Deepmax X5/X6 will be able to locate objects at almost the same depths either in most types of ground or "in air tests". The high sensitivity of the Lornez Deepmax X5/X6 to non- ferrous metal objects like gold, silver and copper together with the new target analysis make this detector an outstanding device for many different locating purposes. The Lorenz Deepmax X5/X6 was developed to provide a number of features including high sensitivity and stability together with easy operation. The amount of controls was therefore reduced and a calibration of the Detector to our factory settings was also made to guarantee best results in the field.

Deepmax Signal Intensity

The Lorenz Deepmax X5/X6 was developed for professional search and locating applications. A variety of search coils can be connected to this metal detector. Large areas can be detected effectively especially with frame coils. Saltwater, most types of ground or temperature changes will only slightly affect the detection range of the Lorenz Deepmax X5/X6. It is possible to eliminate some unwanted objects like nails and foils or to identify them as being small unwanted objects while searching for bigger and deeper objects. In conjunction with small coils the Lorenz Deepmax X5/X6 is a great tool when searching for small objects deep in the ground.

FOUND 6 GOLD SPANISH TREASURE COINS! The First DAY!

We received our Lorenz today. Thanks for shipping it so quickly. A great gold detector! We did our first tests on a small island in the Bahamas. My crew began scanning an area in the center of the island. After a few minutes the Lorenz gave us an indication of a nonferrous target. Be began to dig. After getting down four feet, we stopped and re-scanned the hole getting no indication of  the target. Puzzled, we began to scan the sand pile next to our hole. Well, we found 6 gold escudos, which, unbeknownst to us, we had removed from the hole. When we first spoke I was very skeptical, but one again Kellyco's   good advice has paid off.
Thanks, Chuck Ellis

Sales Staff
- Kellyco Factory Certified Metal Detector Experts
Metal Detector Experts Wanda Roger JW raul steve leilani
Some employee's have their own personal section with product reviews, personal opinions and customer comments. Click on your metal detector expert to access their metal detecting advice.