- Home »
- JW Fishers Metal Detectors »
- JW Fishers Main Page
- Pulse 6x Pro w/o Bulkhead Fitting
- Pulse 6x Pro w/ Bulkhead Fitting
- Pulse 8x Pro w/o Bulkhead Fitting
- Pulse 8x Pro w/ Bulkhead Fitting
- Diver Mag 1
- Proton 4 w/ 150' cable
- Pulse 12 w/ 150' cable
- Pulse 10 w/ 150' cable
- RMD-1
- Side Scan Sonar 100k
- Side Scan Sonar 600k
- Side Scan Sonar 100/600k
- SCAN-650A Scanning Sonar
- SCAN-650B Scanning Sonar
- SeaLion-2 ROV
- SeaOtter-2 ROV
- TOV-1 Towed Video
- DHC-1 Diver Held Camera
- MC-1 MiniCam
- UA-2 Altimeter
- CT-1 Cable Tracker
- SFP1 (Single Frequency Pinger)
- MFP1 (Multi-Frequency Pinger)
- PR-1 Pinger Receiver
- PT-1 Pipe Tracker
- CT-1 Cable Tracker
JW Fishers CT-1 Cable Tracker
Specifically designed to locate and track buried cables including power and communications cablesThe Cable Tracker 1 system consists of a shore based Signal Injector and a Cable Tracker Probe.
Or Call Toll Free 1-888-535-5926
- Portability
- Rugged construction
- Versatility
- And ease of operation
- 0.5 lux low light high resolution b&w camera
- Leak detector
- Two 100 w lights
- 150' cable. 120 vac.
If the cable is a power cable at 60Hz (USA) or 50Hz (Europe) it can be tracked without the use of the shore based Signal Injector. If the cable is a communications cable (no AC power lines), the Signal Injector is connected to the cable at the surface and is set at 1,024Hz (if the approximate location of the cable is known) or 25Hz if long range sensitivity is needed. The probe frequency switch can be set at 25, 50, 60, or 1,024HZ to match the signal source.
So effective is the Cable Tracker 1 system for tracking and pinpointing cables, that in many cases the cable can be located and tracked from a small boat on the surface. The operator holds the nose of the probe in the water.
Once the cable is located and tracked from the surface, the diver enters the water and descends to the bottom where the cable is precisely pinpointed.
Power is supplied by six internal AA rechargeable batteries that will last for 12 continuous hours. The included battery charger connects to any 120 vac voltage source (220 vac charger transformer is optional).
The CT-1 is constructed of corrosion proof urethane and PVC to give many years of trouble free performance. The modular construction allows for easy field repair should it ever be necessary.
The CT-1 Underwater Altimeter is backed by Fishers exclusive, unconditional TWO YEAR warranty.
Kellyco Certified Metal Detector Experts
Value: PRICELESS
Click here for more information
With 220 VAC Transformers
(For Probe Charger and Signal Injector power-Europe)
With Optional Carry Case for Probe and Signal Injector
ONLY $150.00
Call to Order
1-800-327-9697
ONLY $375.00
Call to Order
1-800-327-9697
(Drag cursor over image for details)
(Drag cursor over image for details)
If you find a price you think is lower or better than KELLYCO's Price, just let us know. We will almost always MEET or BEAT ANY PRICE! Click here for more info
- Kellyco Factory Certified Metal Detector Experts
- All Shipping is Carrier Calculated to Give You the Lowest Shipping Cost Possible.
- Kellyco reserves the right to substitute any free items in accessory packs/kits/options when items are no longer in stock.
Reasons to buy your metal detector from Kellyco:
- JW Fishers provides an excellent two year warranty.
- Kellyco Metal Detector Superstore provides a rock-solid lifetime program of backup and support. You are welcome to contact us to answer questions and assist you with any problems or concerns as long as you own your metal detector.























