You have no items in your shopping cart.
Minelab E-Trac Metal Detector
with 11" DD Search Coil Plus FREE Metal Detecting & Treasure Hunting Accessories
Get 28 Deep Detecting Frequencies in One Amazing Detector! Wow! Minelab has done it again, they’ve produced an outstanding Multiple Frequency metal detector having 28 frequencies all operating at the same time peering into the ground, hunting and finding silver and gold coins, diamond rings, gold wedding rings, jewelry, gold, lost and buried treasures of all kinds! If it’s valuable and in the ground or in shallow water the E-Trac will “search and find” treasures missed by other detectors. Picture 28 metal detectors all in one box at the same time finding valuable treasures just for you! Using Minelabs exclusive patented FBS (Full Band Spectrum) technology you get more for your money with features like Smartfind and Quickmask that tune out junk metals while you only hear and dig good (valuable) targets, Pinpointing that tells you exactly where to dig, a large meter that tells you what you found and how deep it is in the ground, plus automatic features that make this metal detector easy to tune and easy to use. E-Trac with brand new technology brings a new advantage to metal detecting that can be used by experts, advanced detectorists, and also first time buyers. Important to remember - E-Trac Comes Ready To Hunt Treasures!
- USB 2.0 Cable
- Detector Stand
- UR-30 Headphones
- 110V NiHM Wall Charger
- E-Trac Xchange Software
- 11" DD Search Coil Cover
- 8AA Battery Holder (E-Series)
- NiMH 1600mah 9.6V Battery Pack (E-Series)
|Factory Included Accessories||
|Search Coil Type||Double D|
|Search Coil Size (in)||11"|
|Search Coil Shape||Round|
|Search Coil Build||Open|
|Waterproof Search Coil||Yes|
|Interchangeable Search Coil||Yes|
|Technology||VLF Multiple Frequency|
|Arm Rest Strap||Yes|
|Assembled Length Max (in)||52.5|
|Assembled Length Min (in)||41.5|
|Control Box Mount||Standard|
|Frequencies||1.5 kHz to 100 kHz|
|Number of Frequencies||28|
|Programmable Target Id||Yes|
|Target Id Segments||1750|
|Ground Balance||Automatic Ground Tracking|
|Search Mode Types||All Metal, Beach, Coins, Depth Reading, High Trash, My Mode #1-4, Pinpoint, Quick Mask, Relics|
|Battery Life (hr)||20 to 25 Hours|
|Exclusive Features||USB Interface, E-Trac Xchange Software, Smart Find Display, Quick Mask, Full Band Spectrum Technology (FBS), Noise Cancellation, Digital Display, 32bit 48MHz Microprocessor|
Minelab E-Trac Metal Detector
The Future is Here...The Future is E-Trac!
Amazing technology! A breakthrough in metal detecting! One detector with so much power, so many different features to search and find all the many valuables you want to find and recover. With EXCLUSIVE FBS Multiple Frequency Technology you’re getting more value for your investment. Nowhere else can you find the value of having 28 deep searching frequencies in one powerful detector!E-Trac’s Advanced Technology Means:
- Greater Detecting Depth
- High Sensitivity Over a Wide Range of Targets
- Less Interference from Electromagnetic Sources
- More Accurate Identification of Target Characteristics
Experience the excitement of discovery as E-Trac sets a new benchmark! Utilizing the precision of Minelab's proven Full Band Spectrum (FBS) 28 multi-frequency technology, E-Trac is fast, sensitive, accurate and DEEP! Advanced digital filtering has been enhanced with the development of new timings ensuring optimum sensitivity and accurate discrimination. A refined discrimination scale supports real-time analysis on target identification utilizing the fastest, most powerful microprocessor ever. New features include superior ergonomics and the introduction of a USB facility with XChange software, allowing you to download, save and email your favorite settings! A logical, intuitive menu supports easy access across all functions making E-Trac a superb choice for new users and experienced detectorists alike.
With Quick Start It's As Easy As
The Minelab E-Trac features a USB port to connect your metal detector to your personal computer. This allows you to save user modes, patterns, your favorite settings, and even the settings of other detectorists! (Perfect for those that share a machine or let someone borrow it). An improved LCD screen provides the highest resolution possible, while a new "QuickMask" feature has been added to the ever-popular "Iron Mask Discrimination" to allow for easier Iron rejection adjustment. The "Sensitivity" gauge has been improved and features suggested levels to give you more time hunting and less time programming.
What You See On the Detector
The Main Menu provides access to all functions and settings of the E-Trac detector. Press the "Menu" button at any time to access the main menu, browse and navigate through each of the icons. You'll see "User Modes," "Discrimination," "Sensitivity," "Audio," "Expert," and "Preferences" - Each of which is customizable for your specific needs.
Each mode is designed and pre-programmed with specific settings and patterns.
The "User Modes" Include the Following:
- High Trash
- Beach and Relics
The Expert Menu provides access to advanced settings and functions that
will maximize your individual performance in unique hunting locations
The "Expert Menu" Includes the Following:
- Recovery Fast: On or Off
- Recovery Deep: On or Off
- Trash Density: Neutral or Difficult
- Noise Cancellation: Automatic or Manual, Adjustable Levels
What You See on Your Personal Computer
Minelab's unique "XChange" software will load once the detector is connected to your personal computer. An installation guide CD is supplied with the E-Trac detector to get you started. You can build an entire resource library with just the click of your mouse! Download and store the settings and patterns that you saved, or upload them later. There is absolutely no limit to the number of stored settings you can save on your computer! (Perfect for re-visiting specific sites with unique ground conditions). Best of all - You can share your settings and experiences with other detectorists once they're saved on your computer!
System Requirements for E-TRAC Xchange
- USB or USB 2.0 port
- Minimum display resolution of 1024 x 768
- USB Data Cable (included with your E-TRAC)
- Windows 2000, Windows XP or Windows Vista
What You're Familiar With
Minelab's precise and proven Full band Spectrum (FBS) multi-frequency technology is a key player in the E-Trac detector, as is the NiMH battery and the perfectly balanced, waterproof 11" DD search coil. Four audio tone settings are available: "Normal," "Long," "Smooth," and "Pitch Hold." The Target Identification has a conductivity range of 1 - 50, and a ferrous content range of 1 - 35.
E-TRAC Detection Screens
Target information is presented via the Smartfind™ discrimination pattern, sensitivity gauge, Fe-Co numbers and depth gauge.
Large Fe and Co numbers coordinate the target crosshairs.
QuickMask™ incorporates two slider controls to adjust the level of ferrous and conductivity discrimination.
The new E-Trac is a metal detector that is a true and genuine detector to be reckoned with. It is right at the very top of metal detector features for all detecting uses. It's a genuine "Does it all Metal Detector"!
E-Trac has brand New Technology combined with proven and established Minelab Technology and then some!
The E-Trac reflects energy, forward thinking creativity in a radically advanced metal detector that can be very easy to use!
This is the type of metal detector which will excel at any task , and the very attractive thing about the E-Trac is it can be as easy to use just by turning it on and allowing the Factory Preset settings to run the show.
Quite simply, E-Trac is capable of delivering some high quality serious detecting and that's what it's all about, isn't it?
Don’t have a computer? Don’t worry!The Minelab E-Trac has upgrades that everyone can enjoy – with or without a computer to hook it up to! With the large selection of modes and programs available, a computer is not required to take full advantage of this great detector.
- 3 Year Warranty
- 11" DD Search Coil
- Weight: 4.8 lbs (2.18 kgs)
- Frequencies: 28 Frequencies Ranging from 1.5 kHz -100 kHz
- Headphone Input: 1/4" Stereo Jack
- Noise Cancel: Automatic and Manual
- Recovery Speed: Selectable (Fast & Deep)
- Batteries: 1600 mAh NiMH or Alkaline Batteries
- Transmission: Full Band Spectrum (FBS) Technology
- Discrimination: 2 Dimensional Smartfind™ Discrimination
- Trash Density: Low or High (selectable based on site conditions)
- Sensitivity Gauge: Auto Level, Manual Level and Suggested Level
- Microprocessor: 32bit, 48MHz Microprocessor - Fast and Powerful
- Audio Tone Settings: 4 Settings - Normal, Long, Smooth, Pitch Hold
- Tone ID Variability: 30 Adjustable Steps for Better Target Identification
- Threshold: Finer Adjust Level 1-50; Improved Stability in High-Trash Areas
- Connectivity: USB Connector for Communication with Personal Computer
- Target Identification: Conductivity Range (1-50), Ferrous Content Range (1-35)
- Ground Balance Modes: Auto Ground Compensation - Advanced Digital Filtering
- Audio Tone Identification: 1, 2, 4 and Multi-Tone; Customizable Conductivity / Ferrous Response
- Sensitivity Adjustment: Fully Automatic; Adjustable from Aggressive to Conservative, Manual Settings 1-30
- Ground Setting: Two Settings, "Neutral" for Most Ground Conditions, and "Difficult" for More Mineralized Soils
- Pinpoint: Modulated Audio for Improved Target Size and Depth Identification with New 'Cross Hair' Visual Indication
- Low Battery Audio Alarm
- Ergonomic Handle Design
- "Single Handed Access" Key Pad Layout
- Auto Latch Feature Provides Semi-Automatic Editing of your Discrimination Patterns
- Software: Intuitive User Interface; Fast Target Processing Multi-Language Functionality
- Visual Display: Large 3/4" Grayscale LCD Panel with Contrast Adjustment and Backlight
- Depth Gauge: New Larger Gauge, Updates in Pinpoint Mode; Can be Turned Off by User
- QuickMask™: Provides the Ability to Quickly and Easily Adjust the Level of Ferrous and Conductive Discrimination
Included Free Accessories- Sku: 64-KITG - Total Value: $397.60
You must be logged in to submit a review. Log in
Best I have used to date
Review by Joe S on November 04, 2013
I have like many others started this hobby with a low or mid range detector and worked my way up as I got comfortable and saw others with better equipment walk behind me and turn up stuff my detector went right over without a peep. So I have learned when u have a good spot and think it is hunted out if you upgrade to go back and check again and normally turn up a couple more things. I have had whites mxt and a fisher f75 newest model and recently wanted to try the etrac due to more readings actually hitting the ground and I have gone back to places that have been hunted out by the lower line detectors and I have been with both my others and turned up more old silver than I had found in places that had not been hunted by many others. This goes way deeper and seems to be able to even find stuff that wasn't even deep that so many others went over. Once you get your settings and learn it you will not be digging trash unless u just want to be sure but after u dig that tab u wil say I knew it was a tab. Other ones I have thought trash and dug a coin they were not good at singling out like the etrac. It does a lot so read and read more about it but once it is learned I will not want another detector and no longer feel your walking over stuff that someone with a better detector will find. You can't go wrong with this one.
Review by Dave .
Review by Dave on June 19, 2012
I have purchased and resold many high end detectors in the past to decide which one was for me. I've been detecting for 40 years and I find that most detectors are pretty good for the job that they're designed to do. The Minelab E-trac was purchased rather recently and I am happy with it and will keep it but there are a couple of things I don't like about it. Let me first start with the positive: I like the way it's designed and built. It is very sleek and pretty well balanced. You can tell that some thought went into the design. It's fairly simple to operate right out of the box. After much experimentation and utilization of other user’s ideas, I settled on the basic coin program with auto sensitivity +2 or +3 as my normal program. I like to set it for "conduct" and "recover deep" as well as "multi tone". For pinpointing I like the "sizing" feature so you can tell if the target is large like a can or small like a coin. I'm one to constantly change settings on things so this detector doesn't tempt me too much to change a lot. It goes deep enough for me with the stock coil but not noticeably deeper than other high end brands. The relatively minor things I don't like are first of all, the time it takes to charge the battery...18hours. I believe it should be an overnight charge and not more. The second thing is the noise cancel....it's great but I think 30 seconds is too long to stand there waiting for it...I feel kinda stupid with people looking on and saying "what's he doing"? The third thing is the sounds of the targets. No matter what settings I use they're still not crisp like on other detectors unless the target is very shallow then its better. These are all very minor annoyances but the fourth thing I don't like is for me, the worst annoyance. The system used on the screen to ID the target to me is not user friendly. Sure, once you've used the detector long enough you can say ok, a quarter is about "12-47" on the number system and about "here" on the screen.
Review by Brad S.
Review by Brad S on May 09, 2012
After extensive research on metal detectors which included type, price and potiential reliable customer service, I decided on purchasing an E-Trac from Kellyco.
Instead of placing my order online, I chose to call instead due a few questions I needed answered in making my final decision. A sales rep, Frank, took my call and was very courteous, informative and went above and beyond making sure I knew of all the freebies, warranties and bonuses of my purchase. The confirmation email was very helpful in making sure addresses were correct and in tracking my purchase through UPS. I received my E-Trac along with the free accessories included, five days later and was very pleased with Kellyco\'s attention to service, products, and customer satisfaction. Being a first time buyer of a metal detector, I am impressed by the E-Trac performance and quality of services I received from Kellyco. I am convinced I made the best possible purchase and chose the best company in doing so. Thank you Kellyco. I look forward to doing business with you in the future.
Review by Brian C.
Review by Brian C on April 10, 2010
I live in Ohio and I mostly hunt for old coins. I purchased the Minelab Etrac in the spring of 2009 and I started by going back over the good spots I had searched to death with my old ($900.00) detector. I started by just turning it on and using the Coins setting. The first thing I noticed was that the Etrac was much more stable and quieter than my old detector. I started by digging everything and in no time at all I was finding wheat cents I had missed and soon silver coins too. I was very impressed that I was finding older coins deeper that I could with my old detector with no real experience with Etrac yet. In 2009, I found 247 silver coins and well over 1000 wheat cents, most were found in local "hunted out" parks. I find that I go to some places now and don't find clad or many surface targets but I do find DEEP coins everyone else missed. I also love how you can change the sounds on Etrac so that silver targets really sing for you. The only bad thing I have found about Etrac is that you will be digging much deeper holes.
Review by Detectorheckler .
Review by Detectorheckler on August 12, 2009
This is absolutely one of the best metal detectors ever made! My decision to buy this Minelab metal detector was made by researching a few metal detector review sites like Kellyco. All the reviews I read were right on the money!
I have been detecting for a long time but this metal detector makes me feel like I am hitting completely new sites once again even though many have been hunted to death!