Bounty Hunter Pioneer 501
with 8" Open Search Coil
You get much more when you buy your Bounty Hunter metal detector from KELLYCO Metal Detector Superstore!
All the Right Stuff for your Treasure Hunt!
After two years of trying to obtain this outstanding metal detector, we have finally secured a few hundred that are brand new and in special boxes. We're not sure if we can obtain anymore at these discounted prices. Buy now at our introductory price.
When you hunt with the best equipment you find more treasure and have more fun – the Pioneer 501 is the right stuff for a fun-filled and exciting hunt!
The Pioneer 501 is the introduction metal detector of this series and like its big brothers, the Pioneer 503 and Pioneer 505 Professional, it is built to last. Find coins and rings that are hidden beneath the surface with ease – this detector was made to be easy, fun and accurate!
With many standard metal detectors, you spend time adjusting controls to get the best performance and, if the settings aren't right, you will definitely get bad results. The Pioneer 501 solves all this. Its automatic features let you just turn it on and immediately start hunting. And with the Pioneer 501, you get features few other detector offers - at a price that may surprise you.
Notch Mode for easy adjustments to find more Gold!
A very unique adjustable notch mode allows the treasure hunter to adjust to a higher level of trash rejection without losing nickels and small gold items. With the Pioneer 501 you can hunt in high-trash sites simultaneously rejecting the trash without missing many of the smaller, gold targets!
Like the other Pioneers, the 501 is lightweight and made from rugged
ABS and aluminum.
It features an LCD meter to clearly display what you've located and has three modes of operation. The audio for the 501 is also exceptional and it features Bounty Hunters rock-solid, 5 year warranty.
Target I.D. metering system for fast recovery of good Targets!
The Pioneer 501's Target Identification system will help you identify many of the coins and rings buried in the ground. Special Multiple Target ID segments makes it even easier and faster to recover your treasure finds!
It's a Snap to operate.
The Pioneer 501 is easy to operate, even for the novice. The easy-to-read coin target ID meter gives you critical information at a glance. The rugged housing resists impact and hard use, and the whole family can get involved!
Why did they add a 4" Search coil to the Pioneer 501 Professional?
A most outstanding search coil used to find coins in trashy areas where larger search coils simply do not work well. Larger search coils locate multiple trash targets tuning out single treasures. The 4 inch search coil efficiently separates targets tuning out and eliminating unwanted trash while still indicating most good treasures. Larger search coils find it difficult to be used in tight spots. The 4 inch search coil can easily slide through plants, shrubbery, roots, and can be used close to metal buildings, under grandstands, and sidewalks. The 4 inch search coil is outstanding for finding smaller items like thin rings, small gold items, and even gold nuggets.
- Target Identification
- Change modes quickly and easily
- 3-Tone Target Identification
- Different types of metals induce different tones. Low tone for iron, nickel and small gold.
- Medium tone for zinc, large gold and most trash
- High tone silver and copper
- Full Discrimination and Notching Capability
- Disc/Notch control allows user to detect or reject a range of metals
- You decide what to detect and which unwanted metals to ignore
- Easy to operate (no tools needed)
- Operating frequency 6.8 Khz
- Super lightweight: 2.8 lbs
- Operates with two 9 volt batteries (not included)
- Five year limited warranty
- Made in the USA