Minelab Pro-Find 25 Kit by Kellyco Metal Detectors
with Minelab's Pro-Find 25 Pinpointer and Custom Belt Sheath, Razor Edge Gator Digger with Treasure Sheath, Treasure Adventure Catalog, and FREE Gound Shipping*Kellyco’s Razor Edge Gator Digger:New Redesigned for 2011 Toughest digging tool made! Now 5 times stronger than the original! New computer designed blade with 24 cutting teeth. Tears through the hardest and most stubborn soils with ease. 24 massive razor edge cutting teeth cut through roots, hard clay, composite soils that literally stops other diggers. Strong carbon steel blade welded through to handle. Orange handle with no-slip blade guard. Blade 7.50 inch x 2.25 inches wide. Overall length, 12.3inches. For a limited time, includes very strong Dura-Pro II cordura carrying sheath with belt loop. With the Gator Diggers double-edged cutting teeth, it can be used by right or left-handed people.
Minelab Treasure Adventure Catalog
Or Call Toll Free 1-888-535-5926
- Length - 9.3 in (237 mm)
- Diameter - 1.6 in (41 mm) base, 0.8 in (20 mm) probe
- Weight with Battery - 6.82 oz (193.5 g)
- Battery - 9 volt PP3 (not included))
- Battery Life - 30 hours nominal (alkaline battery)
- Warranty - 24 months
- FREE Ground Shipping Continental U.S Only
- Pro-Find 25 Pinpointer
- Pro-Find 25 Belt Sheath
- Razor Edge Digger w/ Sheath : From Kellyco
- Minelab Treasure Adventure Catalog
Advantages: |
|||||||||||||
Proportional audio/vibration response For greater accuracy the PRO-FIND 25 indicates the depth of buried targets with a proportional vibration and audio response. As the pinpointer probe gets closer to the target, the intensity of vibration and audio increases. Adjustable sensitivity Narrow down the exact location of targets with the PRO-FIND 25’s adjustable sensitivity. This can be increased to locate deep targets or decreased to precisely locate small targets. Two mode operation Select from two modes Audio & Vibrate or Vibrate Only for silent searching. Durable water resistant construction Submersible probe end. The whole pinpointer can be washed under running water. Probe side sensitivity Probe side detection area (360) allows targets to easily be located in the walls of the hole. Auto power off To save battery life, the PRO-FIND 25 switches off after eight minutes of inactivity. |
LED flash light Easily see targets when pinpointing in low light conditions and in deep holes. Holster included Belt mounted holster to comfortably carry pinpointer.
VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.
The advanced design of the PRO-FIND 25 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field.
|
||||||||||||
If you find a price you think is lower or better than KELLYCO's Price, just let us know. We will almost always MEET or BEAT ANY PRICE! Click here for more info
- Kellyco Factory Certified Metal Detector Experts
- All Shipping is Carrier Calculated to Give You the Lowest Shipping Cost Possible.
- Kellyco reserves the right to substitute any free items in accessory packs/kits/options when items are no longer in stock.













VLF Technology
Detector Interference Free technology



