Metal Detector Headphones
| The MOST IMPORTANT item after your detector! Makes the difference between those who find "surface" coins and those with Quality phones who recover the deeper more valuable coins, rings, jewelry, etc. Many treasures are older and deeper giving off a weak signal when detected due to depth and size. Add the sound of surf on a beach, traffic and wind rustling through the trees, and a dozen other sounds that easily prevent you from hearing that low signal, you pass right over these targets. What separates those who consistently find more older silver coins and even gold coins, in our opinion, are those using headphones, and not just any headphones but phones that are proven to get the deeper targets! The "Soundest" investment you can make.
|
| Kellyco's Best |
| New for 2008 Accusound pro Headphones by Detector Pro |
|
11 reasons why AccuSound
Pro headphones are the
#1 choice for detector users!
AccuSound works with all land detectors many detectorists
say they are able to determine the type of target located
by the sound it produces. Just imagine what they could distinguish
if they were using headphones that were made specifically
for metal detector use, not phones that were designed
for home stereo use. |
List $149.95
Now Only $129.95
Cat#1219-22287 |
| G
o o d |
B
e t t e r |
B
e s t ! |
| Pro
Deluxe Padded Lightweight Hi-Fi |
Audio 200 Headphones |
AccuSound Pro Headphones
by Detector Pro |
Padded ear cups. Adjustable headband
fits all head sizes. Lightweight and comfortable to
wear. This well-made phone with excellent speakers offers
powerful sound. Works with any detector, outfitted with
a standard 1/8" to 1/4" jack. Single sided
cord. Replaces those big,
bulky, sweaty, heavy, uncomfortable heaphones.
Features: Frequency range: 20-18,000Hz
. Impedance: 32 ohm + 10% . Sensitivity:
103 dB S.P.L. at 1k Hz + 3dB . Plus: 3.5mm Stereo
. Length of cord: 4' (1.2) + 10% |
Designed,
tested and approved for ALL "better" metal
detectors. Adjustable headband with left side/ right
side ear cups with individual volume controls stereo/mono
switch. Mylar ear cups enhance weak signals produced
by deep targets. Thin wire receptors captures "signals".
Features:
Frequency Response: 20-18,000 Hz . Max Input: 150mW
. Matching Impedance: 8-32 ohms . Cord Length: 3m spiral
cord . Mode Selector phone jack: Mono/Stereo . Volume
Control: Individual . 1/4" phone jack |
Most metal detectors on the market only output sound to one channel - left or right. These headphones include a built-in switch to adapt to any metal detector so that you hear sound in both channels - left and right. The built in switch allows turning this feature on and off as needed, eliminates the need for extra adapters, and prevents loss in sound quality. While most headphones advertised today operate with impedance range from 8 to 32 ohms, the AccuSound runs at an impressive 150 ohms.
Click Here For More Details
|
Retail
$49.95
SALE $39.95
Code #503-351135 |
Retail
$99.95
Now ONLY $59.95
Code #145-200 |
Retail $149.95
Only $129.95
Cat#1219-22287
|
|
Add
Shipping: Accessories, 1-3 items $9.95; 4-6 items $11.95;
7-9 items $14.95; Every 10 items $19.95 |
Add
Shipping: Accessories, 1-3 items $9.95; 4-6 items $11.95;
7-9 items $14.95; Every 10 items $19.95
|
Koss (UGA) Unity Gain Amplifier
Takes weak signals and amplifies them so that regardless of what type of phone you have, you'll hear those deep targets. You also have full control over the audio output allowing you to control the bass, treble, and mid-range of your headphone. Three expanded frequency response controls are use to "Max Out" the audio target response of your detectors built-in amplifier. Unity gain amplifier only operates when a target sounds a signal, which limits power output saving battery life. Operates on two "AAA" batteries-not included. Belt clip for easy out of the way use.
Features:
Frequency Response: 40 Hz-20kHz . Center Band Frequencies 100 Hz .
1000Hz, 10 kHz . Boost and Cut Levels + 10dB,-10dB
. Cross-talk 40 dB . Distortion (THD + N
@ 1 kHz) Less Than 0.2% . Max. Power Output 20mW
per channel . Cord Length 48 inches
Only $39.95
|
More Great
Headphones at Bargain Prices!
|
Koss Noise Reduction Headphones
The new Koss Noise Reduction headphone was designed for treasure hunters who operate their detectors
in very noisy environments like oceans, city parks or any area that the outside noise is at a high
level. Koss has designed this headset with a very good PASSIVE NOISE REDUCTION SYSTEM.
It's this passive system that enables these phones to cloak over 90% of all outside noise.
This headphone is very well made and will last for many years (so well made that Koss offers
their lifetime warranty). This is one high quality set of headphones.
Koss Lifetime Warranty
Click Here For More Details
|
KOSS KSC75
No stiff headbands!
No headaches! KOSS KSC75 phone clips, the
ultimate in lightweight stereo-phones. Unique Sportclip
design fits around-the-ear and provides comfort and
a secure fit, eliminating the headband. Easy to
use while wearing hat/cap. Titanium-coated
high polymer diaphragm for accurate sound reproduction
so you can hear the deepest targets. Dynamic element
design for extended frequency response. Neodymium iron
boron magnet structures. Oxygen-free copper voice coils
for signal clarity.
Features:
Frequency Response: 15-25,000 Hz . Impedance: 60 ohms
. Weight: 1.5 oz . Sensitivity: 101 dB SPL/1mW . Distortion:
<0.2% . Ear Cushions: . Cord: Straight, Dual Entry,
4ft . Plug: 3.5 mm . Lifetime
Warranty
|
Eagle
Headphones
Designed, tested and approved for ALL Top-Of-The-Line
metal detectors. Adjustable "Flex-type" padded comfort headband. Left
side/ right side (well padded) adjustable slide ear cups with individual volume
controls plus stereo/mono selector switch. Mylar speakers to enhance weak signals
produced by deep targets. Thin wire receptors captures "signals". (especially
sensitive to coins, rings and jewelry). Adjusts well to any size or shape head.
Comfortable when detecting.
|
Retail Price $119.95
SALE $79.95
Code #801-134122
|
KOSS KSC75
Retail Price $34.95
Sale $19.95
Code #801-KSC75
|
Eagle
Headphones
Retail Price $99.95
SALE
$74.95
Code #145-428
|
|
Vibra-Phone 280
Vibra-phone
280 is for you. No tools needed. Just clip it on
to your detector and plug it in to the headphone jack
in place of your headphones. Vibra-phone 280
vibrates to indicate your target. Vibra-Phone 280
uses a standard 9V battery. There are two adjustments.
One sets the sensitivity or level when the unit will
start vibrating. The other adjustment provides
a shot pulse of vibration to a long pulse to match the
tones normally provided by your detector. Set
it once to match your detector. Vibra-Phone 280 works
with all common detector models except for Minelab and
Fisher detectors..
Comes with 1 year warranty
Vibra-Phone
280
On Sale $79.95
Code #384-280
_______________________________________
|
| How
Can You Make the
BEST Even BETTER? |
|
Easily
with these
great headphone systems!
Champion System
Designed
for all coin and relic hunters (except any White's
or Garrett GTA's), the champion Depth-master
will help you find deeper targets while protecting
your hearing against loud blasts!
List $89.95
SALE $76.95
|
|
|